Infineon Boosts Battery Efficiency with Ultra-Low-Power Magnetic Switch

0
20

Infineon Technologies AG has strengthened its XENSIV magnetic sensor range with the introduction of the TLV55624-1O, a new magnetic switch based on TMR technology. The component combines extremely low power consumption with built-in load-switching functionality, helping minimize standby battery usage while reducing the need for additional external components.

Designed for battery-operated healthcare and consumer electronics, the new device supports applications where extended battery life, compact designs and dependable wake-up performance are essential. Potential uses include continuous glucose monitoring (CGM) patches, disposable medical devices, wearable technology, smart glasses, augmented and virtual reality (AR/VR) products, and hearing aids.

The TLV55624-1O has a current consumption of around 7 nA. Up to 50 mA continuous output current allows direct switching of downstream electronics. In CGM patches, the switch can activate the device when it is removed from the applicator. Wake-up takes place automatically, without NFC, a smartphone or an additional controller. In an example based on a 6 mAh silver-oxide cell, the switch can extend shelf life by a factor of ten.

“CGM patches require ultra-low power consumption during storage to maximize shelf life without compromising readiness or waterproof design,” says Thomas Cemernek, Senior Product Manager at Infineon. “The TLV55624-1O combines ultra-low current consumption, contactless magnetic activation and direct load switching in a single device. This helps manufacturers simplify system design and reduce both board space and component count. As a result, they can develop compact, sealed CGM patches that are ready whenever patients need them.”

The TLV55624-1O operates from 1.1 V to 3.6 V and supports low-voltage battery architectures. It integrates a TMR sensing element, comparator circuitry, power management and a push-pull output stage. Dedicated LOCK and FSLP pins hold the output state or force sleep mode. An integrated glitch filter ignores transient magnetic fields before the output state changes. Omni-polar sensing simplifies magnet selection, as the device responds to both north and south magnetic poles. The PG-XQFN-7-1 package measures 1.50 x 1.50 x 0.38 mm³ and supports compact PCB layouts with close magnetic coupling.

LEAVE A REPLY

Please enter your comment!
Please enter your name here