Mouser Electronics, the authorized global distributor with the newest electronic components and industrial automation products, is now shipping the new ACT88911 Integrated ActiveCiPS Power Management IC (PMIC) from Qorvo, a part of Skyworks. The ACT88911 PMIC is an ideal choice for space-constrained applications such as multimedia, AI, AR/VR, FPGA, and computer vision that require scalable, reliable power management.
The ACT88911 PMIC, available from Mouser, delivers a 19-power-rail, highly integrated solution for complex, high-performance electronic systems. The ACT88911 enables flexible power sequencing, dynamic voltage control and efficient operation while reducing component counts and simplifying designs. Substantial PCB area savings are realized by combining multiple power conversion stages, intelligent system management features, and I²C programmability.
The ACT88911 includes 12 configurable GPIOs, which can serve as enable signals for external regulators, interrupts, PWREN, DVS control, LED drivers, push buttons, and more. For LED control, the PMIC supports single- and double-blink and breathing modes with adjustable drive current.
Each ACT88911 device ships with a pre-programmed default configuration and multiple additional configurations that can be optimized for specific designs via I2C. Configurable parameters include output voltage, startup time, slew rate, sequencing, switching frequency, sleep modes, and operating modes. With five buck regulators (Buck 1 and Buck 2 support dual-phase operation for up to 10A typical/12A peak currents), two buck-boost regulators, two boost regulators for LED drive, and ten linear regulators/load switches, this PMIC delivers a complete solution in a compact package (3.76 × 4.16 mm 90-ball WLCSP).
The ACT88911EVK1-101 evaluation kit, also available from Mouser, provides a demonstration and development platform for the ACT88911 PMIC. The kit can be used as a standalone board or connected to a PC using Skyworks’ USB-to-I2C interface dongle for advanced configuration and monitoring through an intuitive graphical user interface (GUI). Built-in features, including programmable startup sequencing, configurable regulator settings, and dedicated test points, simplify the development and validation of power-management designs. The kit integrates buck converters, boost regulators, and LDOs that support multiple output voltages and current levels, making it ideal for assessing complex power architectures in embedded and high-performance applications.












