Vishay Expands PHM-SI Snap-In Capacitor Series With 550 V and 600 V Options

Devices Allow Designers to Reduce Component Counts, Save Space, Lower Costs, and Increase Reliability in High Voltage Designs

0
16

Vishay Intertechnology has expanded its 259 PHM-SI series of snap-in power aluminum electrolytic capacitors by introducing new 550 V and 600 V versions. The upgraded capacitors are designed to simplify high-voltage power systems used in industrial, energy, and medical applications. They help reduce component requirements, save PCB space, lower overall costs, and enhance system reliability.

To cover DC bus voltages from 800 V to 1100 V, engineers have traditionally had to rely on three 400 V to 450 V capacitors in series, which requires balancing resistors and introduces additional points of failure. With voltages up to 600 V, the devices released today allow designers to use fewer capacitors in series, eliminate or reduce the need for voltage balancing circuits, achieve a smaller PCB footprint, and lower BOM costs, while providing greater voltage headroom to improve system lifetime and reliability.

The new 550 V and 600 V capacitors offer high capacitance and voltage ratings in a range of compact sizes. Available configurations include 330 µF / 550 V and 330 µF / 600 V in the 35 mm x 45 mm case, and 470 µF / 550 V and 390 µF / 600 V in the 35 mm x 55 mm case. At these values, the 259 PHM-SI series offers ripple current ratings from 2.14 A to 2.58 A, allowing the capacitors to withstand the demanding switching currents of today’s high power converters. Featuring a cylindrical aluminum case insulated with a blue sleeve, the RoHS-compliant devices are also available with 3-pin keyed polarity snap-in terminals.

As polarized aluminum electrolytic capacitors with a non-solid electrolyte, 259 PHM-SI series devices are ideally suited for buffering, filtering, and energy storage in compact power applications. These include wallboxes and stationary electric vehicle (EV) chargers; industrial motor drives, heating and cooling systems, lamp drivers for UV water treatment systems, plasma cutters, switch cabinets, and UPS; wind turbines and solar panel inverters; and medical instrumentation. With their useful life of more than 3000 h at +105 °C, the capacitors provide more than 10 years of lifetime in ambient temperatures up to 60 °C for these applications.

Device Specification Table:

Part number259 PHM-SI
Case size (D x L in mm)22 x 25 to 35 x 60
Capacitance range39 µF to 2200 µF
Tolerance± 20 %
Ripple current at 100 Hz and +105 °C0.53 A to 4.42 A
Rated voltage200 V to 450 V500 V to 600 V
Category temperature range-40 °C to +105 °C
Useful life at +105 °C> 3000 h
Max. ESR at 100 Hz80 mΩ to 3.31 Ω
Max. impedance at 10 kHz60 mΩ to 2.44 Ω
Sectional specificationIEC 60384-4 / EN 130300
Climatic category IEC 6006840 / 105 / 5625 / 105 / 56

Samples are available from catalog houses in small quantities. Production quantities of the extended 259 PHM-SI series capacitors are available now, with lead times — depending on region — of 12 to 18 weeks.

LEAVE A REPLY

Please enter your comment!
Please enter your name here